| PRODUCT INFORMATION | SPECIFICATION |
| The Upper Excavator with 12m long reach arm | Upper Excavator body | HD210-9 |
| Emission Control | EU Stage III |
| Engine | CUMMINS |
| Engine Type | QSB7 |
| Rated Power kW/rpm | 124/2050 |
| Operating Weight(kg) | 21000 |
| Bucket capacity(m³) | 0.6 |
| Fuel tank capacity(L) | 350 |
| Swing speed(r/min) | 10.7 |
| Hydraulic pump type | AP4VO112TVNW/30RJ-FJ-ICMO-ONM |
| Max flow rate(L/min) | 226*2 |
| Hydraulic fuel tank capacity(L) | 246 |
| Boom Length(mm) | 6500 |
| Arm Length(mm) | 5500 |
| Max digging distance on ground(mm) | 11550 |
| Max horizontal digging distance(mm) | 11950 |
| Max cutting height(mm) | 12850 |
| Max vertical wall digging depth(mm) | 6500 |
| Max digging depth(mm) | 8350 |
| HD200 Pontoon Undercarriage | Model of Pontoon Undercarriage | 200 |
| Travel Motor Assembly | DOOSAN TM40VC x 4 |
| Pontoon and Track Shoe | Material: Q345 Reinforced Steel |
| Thickness of pontoon: Bottom 6mm, Side 4mm |
| Thickness of track shoes: 6mm |
| Material of Chain | 40Cr Hard-wearing Steel (40Cr steel is more wearable and durable
than common steel) |
|
| Anti-rust technology | We use advanced environmental shot blasting technology which can
effectively improve the service life of the pontoon. |
| Color | Black |
| Chains on Each Pontoon | 3 track chains on each pontoon |
| Chains Tensioner | The chain tensioner could adjust the position of the chain wheel to
keep the normal engagement of the chain pin and driving gear. It's
for our pontoon’s standard configuration. |
| Dimension of the Pontoon | 10000mm x 1800mm x 1840mm - single 10000mm x 5200mm x 1840mm -
after connected |
| Pontoon pressing technology | Increase the integral strength of the pontoon, reduce the weight,
improve the relative buoyancy of the whole machine, beautiful and
practical |
| Full automatic pontoon retract and expand | Pontoon Min Width 4300mm, Max Width 5700mm |
| Side Pontoons with spuds | Length 9000mm, Width 1150mm, Height 1000mm Spud length 8000mm |
2pcs hydraulic full automatic spud The automatic spud, on the supd,
we assembled the motor, when the spuds dump, rise and
fall all finished by the oil cylinder motor, just operate the
switch is ok. |
| Main Dimension of the Pontoon Undercarriage | Ground Contact Length of Pontoon (A) - 5000mm |  |
| Pontoon Length (B) - 10000mm |
| Pontoon Height (H) - 1840mm |
| Individual Pontoon Width (K) - 1500mm |
| Track gauge (I) - 3700mm |
| Transportation width (J) - 5200mm |
